Headlight Levelling Switch (If So Equipped); Headlight Flasher - Mitsubishi ECLIPSE Owner's Manual

Features and controls

Headlight flasher

You can flash the high beams by pulling the lever gently
toward you (2). The lights will go back to normal when you let
go. While the high beam is on, you will see a blue light on the
instrument panel.
NOTE
You can flash the high beams by pulling the lever toward
you, even if the light switch is off.
If you turn the lights off with the headlights set to high-
beam illumination, the headlights are automatically
returned to their low-beam setting when the light switch is
3
next turned to the "
3-130
N00550000156
" position.
Headlight levelling switch
The direction of the headlight beam (the direction which the
light shines in) alters according to the number of people and
the load in the vehicle. Lower the headlight angle if it is too
high due to the number of people and/or the load in the vehicle
so that the headlights' glare does not distract the drivers of
approaching vehicles. First set the light switch to the "
position, then turn the headlight levelling switch knob to lower
the beam. The greater the number on the headlight levelling
switch knob, the lower the beam will point.
Set the switch to the appropriate position so that the headlight
beam is level with the road.
(if so equipped)
N00537100046
"