Mitsubishi LANCER Owner's Manual page 207

Features and controls
In addition, when the vehicle is driven with the gearshift lever
in the "D" (DRIVE) position, the forward gear number is
shown.
3
3-112
through
When the gearshift lever position display blinks
When the gearshift lever is placed in the "R" (REVERSE)
position, the gearshift lever position display on the multi-infor-
mation display may blink and the vehicle will not move
because the gears in the transmission have not engaged.
If this occurs, perform the following procedure.
1. Depress the brake pedal with your right foot and place the
gearshift lever in the "N" (NEUTRAL) position.
2. Place the gearshift lever in the "R" (REVERSE) position,
and confirm that the gearshift lever position display stops
blinking.
3. Repeat 1 and 2 above if the gearshift lever position dis-
play continues to blink.
WARNING
!
To avoid unintended vehicle movement, keep brake
pedal applied with your right foot and do not
depress the accelerator pedal, while the gearshift
lever position display is blinking.
If the gearshift lever position display is not showing
There may be a problem in the Twin Clutch SST.
If this occurs, the safety device operates and prevents the vehi-
cle from moving. Therefore, perform the following procedure.
1. Park your vehicle in a safe place and stop the engine.
2. Restart the engine.
N00562500028