Mitsubishi LANCER Owner's Manual page 240

"ASC OFF" switch
The ASC is automatically activated when the ignition switch is
turned to the "ON" position. You can deactivate the system by
pressing down the "ASC OFF" switch for 3 seconds or longer.
When the ASC is deactivated, the
on. To reactivate the ASC, momentarily press the "ASC OFF"
switch ; the display/indicator is turned off.
CAUTION
!
For safety reasons, the "ASC OFF" switch should be
operated when your vehicle is stopped.
Be sure to keep the ASC on while driving in normal
circumstances.
N00559400179
display/indicator will turn
NOTE
Using the "ASC OFF" switch turns off both the skid con-
trol function and the traction control function.
When moving out of mud, sand or fresh snow, pressing
the accelerator pedal may not allow the engine speed to
increase. In such situations, temporarily turning off ASC
with the "ASC OFF" switch will make it easier to move
out your vehicle.
If you continue to press the "ASC OFF" switch after the
ASC is turned off, the "mistaken operation protection
function" will activate and the ASC will turn back on.
Features and controls
3
3-145