Mitsubishi LANCER Owner's Manual page 485

Hide thumbs Also See for LANCER:
Table of Contents

Advertisement

Comfort controls
BALANCE (Left/Right balance control)
To balance the volume from the L (left) and the R (right)
speakers.
NOTE
When set to "0", it will beep.
When PUNCH LEVEL, MUSIC TYPE or SOUND
FIELD is changed, the sound will cut out briefly, but this
does not indicate a malfunction.
The audio adjust mode will automatically shut off when
either the radio or CD is selected, or if no adjustment is
made within about 10 seconds.
If the SOUND switch (4) is pushed and held for more than
2 seconds during the audio adjust mode, it will change to
"Hold" mode. The selected audio mode will be held until
the SOUND switch (4) is pushed for more than 2 seconds
again.
Speed Compensated Volume function
5
Speed Compensated Volume function is a feature that automat-
ically adjusts the VOLUME, BASS, MIDDLE, and TREBLE
settings in accordance with the vehicle speed. It is possible to
turn this function ON-OFF using the following methods:
1. If you are presently pushing the SOUND switch (4) and
making a tone adjustment, finish making the tone adjust-
ment.
5-86
2. Push the SOUND switch for at least about 2 seconds. The
system will switch to MENU mode and the characters
"SCV ON" will be shown on the display.
NOTE
When you enter the MENU mode while listening to satel-
lite radio (if so equipped), "SKIP SETTING" will be
shown on the display and you will enter the satellite radio
setting mode. Every time you press the SOUND switch
(4), the display will change in the following order: "SKIP
SETTING" → "LOCK SETTING" → "SCV ON." Press
the SOUND switch (4) until "SCV ON" is shown on the
display, to switch to the setting mode for the Speed Com-
pensated Volume function.
3. Turn the SOUND switch (4) clockwise to the turn the
function ON. Turn it counterclockwise to turn the function
OFF.
NOTE
N00752200167
The factory setting for the Speed Compensated Volume
function is ON.
The MENU mode will automatically shut off when either
the radio or CD is selected or the user does not move any
of the switches for 10 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents