Indicators; Warning Lights; Brake Warning Light; High Beam Indicator - Mitsubishi LANCER Owner's Manual

Features and controls
Turn signal indicators/Hazard warning lights
The arrows will flash in time with the corresponding exterior
turn signals when the turn signal lever is used.
Both arrows will flash when the hazard warning flasher switch
is pressed.
NOTE
If the indicator flashes faster than usual or if the indicator
3
stays on without flashing, check for a malfunctioning turn
signal light bulb or turn signal connection.

High beam indicator

A blue light comes on when the headlights are on high beam.

Front fog light indicator

This indicator comes on while the front fog lights are on.
Position indicator
This indicator light illuminates while the position lights are on.
3-214

Indicators

(if so equipped)
N00519900127

Brake warning light

N00520000216
When the ignition switch is turned to the "ON" position, this
indicator normally comes on and goes out a few seconds later.
A warning is also displayed in the multi-information display.
The warning light also illuminates after starting the engine
under the following conditions:
When the parking brake is still applied.
When the brake fluid level is low.
When the brake force distribution function is not operat-
ing correctly.
Before driving, be sure that the parking brake is fully released
and brake warning light is off.
N00520100086
N00520200205
N00551300026

Warning lights

N00520300147
N00520400467