Mitsubishi LANCER Owner's Manual page 203

Features and controls
Parking
To park the vehicle, first bring it to a complete stop, fully
engage the parking brake, and then move the selector lever to
the "P" (PARK) position.
If you are going to leave the vehicle unattended, always switch
off the engine and carry the key.
NOTE
On a slope, be sure to apply the parking brake before
moving the selector lever to the "P" (PARK) position. If
you move the selector lever to the "P" (PARK) position
before applying the parking brake, it may be difficult to
disengage the selector lever from the "P" (PARK) position
3
when next you drive the vehicle, requiring application of a
strong force to the selector lever to move from the "P"
(PARK) position.
3-108
When the CVT makes no speed change
N00515100062
If the CVT does not shift while driving, or your vehicle does
not pick up enough speed when starting on an uphill slope,
there may be something unusual happening in the transmission,
causing a safety device to activate. Have your vehicle checked
at an authorized Mitsubishi Motors dealer or a repair facility of
your choice as soon as possible.
1. If your vehicle has difficulty moving uphill, shift the
selector lever into "L" (LOW) position (except for vehi-
cles with sport mode) or 2nd shift range of the sports
mode.
This method might not work depending on the type of
transmission malfunction.
2. Once the vehicle is moving on a level road, move the
selector lever back to "D" (DRIVE) position.
NOTE
When the
appears on the information screen in the multi-informa-
tion display, there could be a malfunction in the CVT.
Refer to "Continuously variable transmission (CVT):
Warning display" on page 3-102.
warning display or the warning display
N00515300194