Subwoofer Low Pass Filter; Synchronizing Audio With Video Output (A/V Sync) - Sony STR-DN1060 Parts And Controls

[160] Adjusting Settings
Setting the low-pass filter for the subwoofer output

(Subwoofer Low Pass Filter)

You can turn the low-pass filter for the subwoofer output on or off. You can set the function
for each input to which an audio input jack is assigned independently. Turn the function on if
you connect a subwoofer without the crossover frequency function.
1. Select [Setup] - [Audio Settings] from the home menu.
2. Select [Subwoofer Low Pass Filter].
3. Select the setting you want.
On: Always activates the low-pass filter with a cutoff frequency of 120 Hz.
Off: Does not activate the low-pass filter.
Note
This function does not work in the following cases:
[Analog Direct] is being used.
[Bluetooth Mode] is set to [Transmitter].
[161] Adjusting Settings

Synchronizing audio with video output (A/V Sync)

You can delay the output of audio to minimize the time gap between audio output and a
visual display.
This function is useful when using a large LCD or plasma monitor or a projector. You can set
the function for each input independently.
1. Select [Setup] - [Audio Settings] from the home menu.
2. Select [A/V Sync].
3. Select the setting you want.
HDMI Auto: The time gap between the audio output and visual display of a monitor
connected via an HDMI connection will be adjusted automatically. This feature is
Audio Settings
Audio Settings