Sony STR-DN1060 Parts And Controls page 26

1. (on/standby)
Turns the receiver on or sets it to the standby mode.
Saving power in standby mode
Save power by setting the receiver as follows:
Set [Control for HDMI], [Remote Start], [Bluetooth Standby] and [Quick
Start/Network Standby] (*) to [Off].
Turn off the power for Zone 2, Zone 3 and HDMI zone. (for STR-DN1060 only)
2. Input buttons
Select the input channel connected to the device you want to use.
When you press any of the input buttons, the receiver turns on.
3. BLUETOOTH RX/TX
Switches the BLUETOOTH mode of the receiver. (Disabled while the BLUETOOTH
function or Screen mirroring function is activated.)
In BLUETOOTH RX mode, the receiver receives and outputs audio from the remote
device.
In BLUETOOTH TX mode, the receiver sends audio to the remote device.
4. MIRRORING
Starts the Screen mirroring function.
5. HDMI OUTPUT
Switches the output for two monitors connected to the HDMI OUT A (TV) and HDMI
OUT B/HDMI ZONE jacks. Output is toggled between [HDMI A], [HDMI B], [HDMI A+B]
and [HDMI OFF] each time the button is pressed. Select [HDMI OFF] to turn off the
output for HDMI OUT A and HDMI OUT B jacks. (for STR-DN1060 only)
Turns the output for HDMI TV OUT on/off. (for STR-DN860 only)