The Surround Effect Cannot Be Obtained - Sony STR-DN1060 Parts And Controls

[236] Troubleshooting
Dolby Digital or DTS multi-channel sound is not
reproduced.
Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format.
When connecting the DVD player, etc., to the digital input jacks of this receiver, make
sure the digital audio output setting of the connected device is available.
Set [Audio Out] to [AMP] in the HDMI Settings menu.
You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and
Multi Channel Linear PCM with an HDMI connection.
[237] Troubleshooting

The surround effect cannot be obtained.

Make sure you have selected a sound field for movies or music.
[PLll Movie], [PLll Music], [PLllx Movie], [PLllx Music], [Neo:6 Cinema] and [Neo:6 Music]
do not work when the speaker pattern is set to 2/0 or 2/0.1.
[238] Troubleshooting
A test tone is not output from the speakers.
The speaker cables may not be connected securely. Check that they are connected
securely and cannot be disconnected by pulling on them slightly.
The speaker cables may have short-circuited.
[239] Troubleshooting
A test tone is output from a different speaker than the
speaker displayed on the TV screen.
The speaker pattern setup is incorrect. Make sure that the speaker connections and the
Sound
Sound
Sound
Sound