Upscaling Video Signals To 4K (Hdmi In 4K Scaling); Controlling Hdmi Devices (Control For Hdmi) - Sony STR-DN1060 Parts And Controls

Upscaling video signals to 4K (HDMI In 4K Scaling)

You can upscale video signals to 4K and output them through the HDMI OUT jacks of the
receiver.
1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [HDMI In 4K Scaling].
3. Select the setting you want.
Auto: Enables video scaling control of 4K HDMI output automatically if you connect
a 4K-compatible TV.
Off
Note
This function works only when video signals are received via the HDMI IN jacks.
HDMI input signal must be 480p/720p/1080i/1080p 2D signal.
The HDMI OUT B/HDMI ZONE jack does not support [HDMI In 4K Scaling]. Video signals
are output in the same resolution as the input resolution. (for STR-DN1060 only)
[173] Adjusting Settings

Controlling HDMI devices (Control for HDMI)

You can turn the Control for HDMI function on or off.
1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [Control for HDMI].
3. Set to [On] or [Off].
Note
When you set [Control for HDMI] to [On], [Audio Out] may be changed automatically.
When the receiver is in standby mode, the
lights up in amber if [Control for HDMI] is set to [On].
This function works only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060
only)
HDMI Settings
(on/standby) indicator on the front panel