No 3D Image Appears On The Tv; No 4K Image Appears On The Tv; Standby Mode - Sony STR-DN1060 Parts And Controls

The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this
case,
set to [HDMI ON] (for STR-DN860 only).
set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1060 only).
If you want to play HDCP 2.2 content, be sure to connect the device to the HDCP 2.2-
compatible HDMI input and output of the receiver. Also check that the TV is compatible
with HDCP 2.2.
[225] Troubleshooting

No 3D image appears on the TV.

Depending on the TV or the video device, 3D images may not be displayed. Check the
HDMI video formats supported by the receiver.
Be sure to use a High Speed HDMI cable.
[226] Troubleshooting

No 4K image appears on the TV.

Depending on the TV or the video device, 4K images may not be displayed. Check the
video capability and settings of your TV and video device. Also, make sure you connect
the video device to the 4K-compatible HDMI IN jack of this receiver.
Be sure to use a High Speed HDMI cable.
If you want to playback HDCP 2.2 content, be sure to connect the device and TV to the
HDCP 2.2 capable HDMI input and output of the receiver. Also check that the TV is
compatible with HDCP 2.2.
[227] Troubleshooting
No image is output from the TV when the receiver is in

standby mode.

When the receiver enters standby mode, the image from the last HDMI device selected
before you turned off the receiver is displayed. If you are enjoying content from another
Image
Image
Image