Turning On The Receiver - Sony STR-DN1060 Parts And Controls

Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause
a malfunction.
If you do not intend to use the remote control for an extended period of time, remove the
batteries to avoid possible damage from battery leakage and corrosion.
When the receiver no longer responds to the remote control, replace both of the batteries
with new ones.
[41] Preparation

Turning on the receiver

When you have made all connections with the other devices, connect the AC power cord
(mains lead), then turn on the receiver.
1. Connect the AC power cord (mains lead) to a wall outlet.
2. Press (on/standby) to turn on the receiver.
You can also turn on the receiver using
off the receiver, press
Note
6. Turning on the receiver/preparing the remote control
(on/standby) again.
(on/standby) on the remote control. To turn