Sony STR-DN1060 Parts And Controls page 48

Note
Depending on the TV or video device, 4K or 3D images may not be displayed. Check the
HDMI video formats supported by the receiver.
Refer to the operating instructions of each connected device for details.
[25] Preparation
Connecting devices with HDMI jacks (for STR-DN1060)
Connect devices to the receiver as illustrated below. Before connecting cables, be sure to
disconnect the AC power cord (mains lead).
The HDMI jacks designated as being "HDCP 2.2" (HDMI IN SAT/CATV (MHL), HDMI OUT A
(TV)) support High-bandwidth Digital Content Protection System Revision 2.2 (HDCP 2.2).
To watch content protected by HDCP 2.2, such as 4K content, connect these HDMI jacks to
jacks that support HDCP 2.2 on the TV and player. Refer to the operating instructions of the
connected device for details.
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
4. Connecting audio-visual devices and the antennas (aerials)