Crossover Frequency - Sony STR-DN1060 Parts And Controls

The adjusted value is shown on the TV screen during adjustment.
To output a test tone from adjacent speakers
See "Adjusting the balance between adjacent speakers by outputting a test tone (Phase
Noise)."
To output the source sound from adjacent speakers
See "Adjusting the balance between adjacent speakers by outputting a source sound (Phase
Audio)."
[149] Adjusting Settings
Setting the crossover frequency of the speakers

(Crossover Frequency)

You can set the bass crossover frequency of speakers for which the speaker size has been
set to [Small] in the Speaker Settings menu. A measured speaker crossover frequency is set
for each speaker after the Auto Calibration is performed.
1. Select [Setup] - [Speaker Settings] from the home menu.
2. Select [Crossover Frequency].
3. Select the speaker for which you want to adjust the crossover frequency on the screen.
4. Press / to set the crossover frequency.
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
The surround back speakers will be set to the same setting as that of the surround
speakers.
[150] Adjusting Settings
Adjusting the equalizer (Equalizer)
Speaker Settings
Speaker Settings