Sony STR-DN1060 Parts And Controls page 40

Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Note
For this connection, you need to turn the Control for HDMI function on. Press HOME to
display the home menu, select [Setup] - [HDMI Settings], and set [Control for HDMI] to
[On].
Hint
If the HDMI jack of the TV (labeled "ARC") is already connected to another device,
disconnect the device and connect the receiver.
Connecting a TV and a projector
HDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
Note
For this connection, set [HDMI Out B Mode] in the HDMI Settings menu to [Main].
Connecting a TV without HDMI jacks
Solid lines show recommended connections and the dashed lines show alternative
connections for both video and audio signals. It is not necessary to connect all the cables.