The Left And Right Sound Is Unbalanced Or Reversed - Sony STR-DN1060 Parts And Controls

When you connect the receiver to a video device (projector, etc.), sound may not be
output from the receiver. In this case, set [Audio Out] to [AMP] in the HDMI Settings
menu.
You cannot listen to the sound of a device connected to the receiver while TV input is
selected on the receiver.
Be sure to change the input of the receiver to HDMI if you want to watch a program on a device
connected via HDMI connection to the receiver.
Change the TV channel if you want to watch a TV broadcast.
Be sure to select the correct device or input when watching a program from a device connected to
the TV. Refer to the section on this operation in the operating instructions of the TV.
Sound is not output if you use [Analog Direct] when an HDMI input or digital input
(COAXIAL or OPTICAL) is selected. Use another sound field.
When using the Control for HDMI function, you cannot control connected devices using
the remote control of the TV.
Some devices and TVs need to be set up. Refer to the operating instructions supplied with each
device and TV.
Change the input of the receiver to the HDMI input connected to the device.
Check that the selected digital audio input jack is not assigned to another input.
[234] Troubleshooting
There is no sound from the TV via the HDMI OUT (ARC)
jack when using the Audio Return Channel function.
Set [Control for HDMI] to [On] in the HDMI Settings menu.
Make sure that your TV is compatible with the Audio Return Channel function.
Make sure that the HDMI cable is connected to a jack on your TV that is compatible with
the Audio Return Channel function.
[235] Troubleshooting

The left and right sound is unbalanced or reversed.

Check that the speakers and device are connected correctly and securely.
Adjust the sound level parameters using the Speaker Settings menu.
Sound
Sound