Sony STR-DN1060 Parts And Controls page 152

By using the front high speakers, you can lift up the sounds of the center speaker to an
appropriate height on the screen, allowing you to enjoy natural sound without discomfort.
1. Select [Setup] - [Speaker Settings] from the home menu.
2. Select [Center Speaker Lift Up].
3. Select the setting you want.
1 - 10
Off
Note
This function does not work in the following cases:
Headphones are connected.
There is no center speaker.
There are no front high speakers.
The [2ch Stereo], [Analog Direct] and [Multi Stereo] sound fields are being used.
A sound field for music is being used.
[Bluetooth Mode] is set to [Transmitter].
[152] Adjusting Settings
Setting the height from the floor to the ceiling speakers
(Ceiling Speaker Height)
Set the height from the floor to the ceiling speakers. You can enjoy the [In-Ceiling Speaker
Mode] function more by configuring this setting and performing Auto Calibration.
1. Select [Setup] - [Speaker Settings] from the home menu.
2. Select [Ceiling Speaker Height].
3. Adjust the height.
Note
This function does not work in the following cases:
A speaker pattern that includes front high speakers is selected.
Headphones are connected.
Speaker Settings