Sony STR-DN1060 Parts And Controls page 208

Make sure the router or the wireless LAN router/access point is turned on.
The network settings on the receiver may be incorrect.
If the connection failed, set up the network connection again.
Confirm that the receiver is connected to the router or the wireless LAN router/access
point correctly.
If the receiver is connected to a wireless network, move the receiver and the wireless LAN
router/access point closer to each other.
If you have initialized the receiver or performed a system recovery on your server, perform
the network settings again.
[264] Troubleshooting
A server does not appear in the server list. ([Cannot find
the server.] appears on the TV screen.)
You may have turned on this receiver before you turned on the server. Refresh the server
list.
Make sure that the router or the wireless LAN router/access point is turned on.
The server may require some settings to accept the connection from the receiver.
Confirm that the server has been configured correctly. Confirm that the receiver is allowed
to receive music streamed from the server.
Confirm that the receiver and the server are connected to the router or the wireless LAN
router/access point correctly. Check the network settings information.
Refer to the operating instructions of your router or wireless LAN router/access point and
check the multicast setting. Try turning the multicast setting on or off on the wireless LAN
router/access point.
If your server is a software application on your PC, check the firewall setup and the
security software settings.
[265] Troubleshooting
Playback does not start, or the player does not
automatically proceed to the next track or file.
Make sure that the audio file you are trying to play is in a format supported by this
receiver.
Audio content with DRM (Digital Rights Management) copyright protection cannot be
Home Network
Home Network