Selecting The Language Of Digital Broadcasts (Dual Mono) - Sony STR-DN1060 Parts And Controls

Volume)
This receiver can adjust its volume automatically depending on the input signal or content
from a connected device.
This function is useful, for example, when the sound of commercials is louder than a TV
program.
1. Select [Setup] - [Audio Settings] from the home menu.
2. Select [Advanced Auto Volume].
3. Set to [On] or [Off].
Note
Be sure to reduce the volume level before you turn this function on or off.
The Advanced Auto Volume function may not work, depending on the audio format.
This function does not work in the following cases:
[Analog Direct] is being used.
[Bluetooth Mode] is set to [Transmitter].
[164] Adjusting Settings

Selecting the language of digital broadcasts (Dual Mono)

You can select the language you want when listening to a digital broadcast with dual audio.
This function only works for Dolby Digital sources.
1. Select [Setup] - [Audio Settings] from the home menu.
2. Select [Dual Mono].
3. Select the setting you want.
Main: Sound in the main language will be output.
Sub: Sound in the sub language will be output.
Main/Sub: Sound in the main language will be output through the front left speaker
and sound in the sub language will be output through the front right speaker
simultaneously.
Audio Settings