Synchronizing Audio With Video Output (A/V Sync); Selecting The Language Of Digital Broadcasts (Dual Mono); Subwoofer Low Pass Filter - Sony STR-ZA5000ES User Manual

Change the scene setting on the TV (Scene Select).
Change the setting of [Equalizer], [Sound Optimizer], [Dynamic Range Compressor] or [In-
Ceiling Speaker Mode].
Note
[Equalizer], [Sound Optimizer], [Dynamic Range Compressor] and [In-Ceiling Speaker Mode] do not
work when the Pure Direct function is selected.
Hint
You can also use PURE DIRECT to turn the Pure Direct function on or off.
You can also select [Pure Direct] in the [Audio Setup] menu.
[126] Adjusting Settings Audio Setup
Setting the low-pass filter for the subwoofer output

(Subwoofer Low Pass Filter)

You can turn the low-pass filter for the subwoofer output on or off. You can set the function for
each input to which an audio input jack is assigned independently. Turn the function on if you
connect a subwoofer without the crossover frequency function.
1 Select [Setup] - [Audio Setup] from the home menu.
2 Select [Subwoofer Low Pass Filter].
3 Select the setting you want.
On: Always activates the low-pass filter with a cutoff frequency of 120 Hz.
Off: Does not activate the low-pass filter.
Note
This function does not work when [Direct] is being used and an analog input is selected.
[127] Adjusting Settings Audio Setup

Synchronizing audio with video output (A/V Sync)

You can delay the output of audio to minimize the time gap between audio output and a visual
display.
This function is useful when using a large LCD or plasma monitor or a projector. You can set
the function for each input independently.
Select [Setup] - [Audio Setup] from the home menu.
1
Select [A/V Sync].
2
3 Select the setting you want.
HDMI Auto: The time gap between the audio output and visual display of a monitor
connected via an HDMI connection will be adjusted automatically. This function is
available only when the monitor supports the A/V Sync function.
0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals.
Note
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of
the input signals, depending on the audio format.
[128] Adjusting Settings Audio Setup
Selecting the language of digital broadcasts (Dual
Mono)
You can select the language you want when listening to a digital broadcast with dual audio. This
function only works for Dolby Digital sources.
Select [Setup] - [Audio Setup] from the home menu.
1