Sony STR-DN1060 Parts And Controls page 169

1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [Priority].
3. Select the setting you want.
Main & Zone:
You can enjoy the same input in the main zone and HDMI zone. However, there may
be some interference between the audio and video signals in the main zone and
those in the HDMI zone.
Main Only:
You can enjoy good audio and video quality in the main zone. However, if the same
input is selected in HDMI zone, there will be no video or audio output from HDMI
zone.
Note
This function works only when [HDMI Out B Mode] is set to [Zone].
Hint
If you connect TVs that have different resolutions to the main zone and HDMI zone but
select the same HDMI input for both zones, the lower of the two resolutions is used for
the video signals output to both TVs.
[179] Adjusting Settings
Speeding up the display when switching the HDMI input
(Fast View)
You can set the Fast View function for the HDMI inputs.
1. Select [Setup] - [HDMI Settings] from the home menu.
2. Select [Fast View].
3. Select the setting you want.
Auto: You can select HDMI input faster than normal selection.
Off: The Fast View function is not available.
Note
This function is enabled only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060
HDMI Settings