Sony STR-DN1060 Parts And Controls page 172

You can enter up to 8 characters for each input name.
1. Select [Setup] - [Input Settings] from the home menu.
2. Select the input name you want to change.
3. Select [Name].
An on-screen keyboard appears on the TV screen.
4. Press / /
5. Select [Enter].
The name you entered is registered.
[183] Adjusting Settings
Setting up a wired LAN connection
You can set up a wired LAN connection by the following procedure.
1. Select [Setup] - [Network Settings] from the home menu.
2. Select [Internet Settings].
3. Select [Wired Setup].
The screen for selecting the IP address acquisition method appears on the TV screen.
4. Select [Auto].
The system starts connecting to the network.
The confirmation screen appears.
5. Press / to browse information, and then press
6. Select [Save & Connect].
The system starts connecting to the network. For details, refer to the messages that
appear on the TV screen.
If using a fixed IP address
Select [Custom] in step 4 and follow the on-screen instructions.
Hint
/ and to select characters one by one to enter the name.
Network Settings
.