Sony STR-DN1060 Parts And Controls page 85

Note
RDS may not work properly if the station you tuned to does not transmit the RDS signal or
if the signal strength is weak.
Some letters that can be displayed on the TV screen cannot be displayed on the display
panel.
Hint
You can check the frequency while a Program Service name is displayed by pressing
DISPLAY MODE on the receiver repeatedly.
[67] Enjoying Video and Sound
Selecting a sound field (Sound Field)
You can select from a variety of sound field modes according to speaker connections or
input sources.
1. Select [Setup] - [Audio Settings] from the home menu.
2. Select [Sound Field].
3. Select the sound field you want.
For movies, select a sound field labeled with [Movie].
For music, select a sound field labeled with [Music].
Note
You cannot select sound effects when [Bluetooth Mode] is set to [Transmitter].
When listening with headphones, only the sound fields for headphones appear.
The sound fields for movie and music may not work, depending on the input or the
speaker pattern you select, or with audio formats.
The receiver may play signals at a lower sampling frequency than the actual sampling
frequency of the input signals, depending on the audio format.
[PLllx Movie] or [PLllx Music] may not appear, depending on the speaker pattern you
select.
Some speakers or the subwoofer may not output sound, depending on the sound field
setting.
Hint
You can also select [Sound Field] in [Sound Effects] from the home menu.
You can also use A.F.D./2CH, MOVIE or MUSIC on the remote control or the receiver to
select a sound field.
Enjoying sound effects