Sony STR-DN1060 Parts And Controls page 84

2. Confirm that the frequency indication on the left of the screen is highlighted and press
.
3. Enter the frequency using
i. Press /
ii. Press /
4. Press .
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] appears and then the screen
returns to the current frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still
cannot tune to a station, the frequency may not be in use in your area.
Hint
The tuning scale for direct tuning is shown below:
USA and Canadian models
100 kHz
Other models
50 kHz
[66] Enjoying Video and Sound
Receiving RDS broadcasts (for European and Asia-
Pacific models only)
This receiver allows you to use Radio Data System (RDS), which enables FM radio stations
(*) to send additional information along with the regular programming signal. This receiver
offers convenient RDS features, such as Program Service name display.
*
Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not
familiar with the RDS services in your area, check with your local radio stations for details.
1. Select [Listen] - [FM TUNER] from the home menu.
2. Select a station.
When you tune to a station that provides RDS services, the Program Service name
appears on the TV screen and the display panel.
/ /
to select a digit.
to change the digit.
Listening to the radio
/ .