Sony STR-DN1060 Parts And Controls page 179

Checking the BLUETOOTH device list (Device List)
You can check a list of the paired and detected BLUETOOTH receivers when [Bluetooth
Mode] is set to [Transmitter]. You can perform pairing with detected devices from the list.
1. Select [Setup] - [Bluetooth Settings] from the home menu.
2. Select [Device List].
Hint
Select [Scan] to refresh the list.
[196] Adjusting Settings
Setting the Bluetooth Standby mode (Bluetooth Standby)
You can set the Bluetooth Standby mode so that the receiver can be controlled by a
BLUETOOTH device even when the receiver is in standby mode.
1. Select [Setup] - [Bluetooth Settings] from the home menu.
2. Select [Bluetooth Standby].
3. Select [On] or [Off].
On: You can turn on the receiver from a BLUETOOTH device.
Off
Note
If a previously paired device is paired when the receiver is in standby mode, the
(on/standby) indicator on the front panel lights up in amber if [Bluetooth Standby] is set to
[On].
This function works only when [Bluetooth Mode] is set to [Receiver] or [Transmitter].
If you set [Quick Start/Network Standby] to [On] and [Bluetooth Standby] to [On], the
receiver turns on when you establish a BLUETOOTH connection from a BLUETOOTH
device. (For USA, Canadian and Asia-Pacific models only)
Bluetooth Settings