MV Agusta Brutale 675 Workshop Manual page 289

Then, put the dust seal in (2) by hand.
While holding the sheath in an upright position, insert
the spring press spacer; pour in the following oil quan-
tities:
- BRUTALE 800:
- DRAGSTER 800:
(*): approximate quantity calculated in relation to the
actual maintenance level
Repeatedly move the damping piston rod up and down
until the it slides smoothly.
Oil type used: SAE 7,5
Recommended oil: Marzocchi EBH16 SAE 7,5
Check that the oil is at level "X" with reference to the
upper sheath rim, measured when the sheath is com-
pletely compressed.
- BRUTALE 800 (**):
- DRAGSTER 800 (**): X = 65 mm
(**): N.B.: Measured with the pumping rod at the
end of its stroke and the spring spacer in.
Suspension and wheels
450 cc(*)
450 cc(*)
X = 65 mm
- 35 -
2
F