MV Agusta Brutale 675 Workshop Manual page 402

Brakes
Assemble the union tightening to the prescribed
torque.
23÷26 N•m
Torque pressure: 23 ÷ 26 N·m
NOTE Substitute the gaskets with new ones.
Proceed with the filling and bleeding of the rear brake
system (see page 21).
Rear brake pump removal
Carry out the emptying of the brake system as previ-
ously described.
Unscrew the two fixing screws (1) of the rear brake
1
pump protection (2).
H
2
Loosen the nut (3) and remove the clip with the pump
control fork pin (4) by turning the pin and pulling it out
(see figure).
4
3
- 24 -