MV Agusta Brutale 675 Workshop Manual page 81

- Press "OK" for over three seconds to confirm the
selected maximum speed value. The displayed digit
stops blinking and the display returns to "RUN" mode.
- On the other hand, if you press "SET" for over three
seconds, the "SPEED LIMITER" function is disabled.
The display shows the "OFF" caption. After three sec-
onds, the display returns to "RUN" mode.
- If the "SPEED LIMITER" function has been enabled,
when riding the vehicle the speed value shown on the
odometer starts blinking when it reaches the set value
of the maximum speed.
"TC" Mode
- Press "SET" in order to access to "TC" mode, then
press "OK" for less than three seconds until "TC
LEVEL" appears. The current traction control level is
the same as the one shown on the display.
The traction control level may be changed
NOTE
or set even during the use of the vehicle.
Maintenance
- 65 -
B