MV Agusta Brutale 675 Workshop Manual page 285

Suspension and wheels
Separate sleeve and stem by pulling along the axis.
Remove the central lower screw that fixes the damping
F
piston. Keep the sealing washer underneath.
35 N•m
When refitting, tighten at 35 N•m.
Pull out the damping piston.
Take care not to reverse the pumping elements on the
fork while fitting them back in, according to the fol-
lowing configuration:
- Compression damping pumping element: fit on left
leg.
- Rebound damping pumping element: fit on right leg.
- 31 -