MV Agusta Brutale 675 Workshop Manual page 294

Insert the brake hose in the housing on the clamp (3)
(Brutale ABS / Dragster excluded).
Mount the front wheel and brake calipers according to
procedures contained in the page 9.
Front suspension adjustment
F
(Brutale 800 / Dragster)
After properly fitting the fork assembly, adjust the front
suspension so to ensure optimum vehicle geometry.
Refer to the values contained in the table at the bottom
of this page to adjust the front suspension.
Adjustments contained in the table must
NOTE
be carried out from initial reference posi-
tions:
- Spring preload: Turn counterclockwise to
end stroke.
- Rebound damper: Turn clockwise to end
stroke.
- Compression damper: Turn clockwise to
end stroke.
Brutale 800
Spring preload
Rebound damping
Compression damping
Dragster 800
Spring preload
Rebound damping
Compression damping
Suspension and wheels
Type of set-up (On road)
5 turns
2,5 turns
2,5 turns
Type of set-up (On road)
5,5 turns
3 turns
3 turns
Spring preload
Compression damper
Rebound damper
- 40 -
3
Rebound damper
Spring preload
Spring preload
Compression damper