MV Agusta Brutale 675 Workshop Manual page 364

Make sure that none of the surfaces of the housings
have signs of impact or dents.
Using a bore meter, check circularity of the housing of
the bearing in the marked cylindrical area.
G
Check that there are no dents or evident breakage on
frame tubes.
Replace frame if any damage is detected.
In this case, remove the following components:
- Rubber elements and springs
WARNING: If any damage occurs to the
motorcycle frame structure, MV Agusta
recommends the immediate replacement of
the frame, while advising against and, in any
case, not authorizing since now any kind of
intervention (except repainting) which implies
(by way of example but not limited to) the
straightening and/or the welding of the frame.
This procedure is recommended by MV
Agusta in order to guarantee motorcycle
safety to the final Customer and to third par-
ties in a general way.
Failure to observe the above instructions and
recommendations relieves MV Agusta from
any responsibility.
Frame
- 26 -