MV Agusta Brutale 675 Workshop Manual page 233

Electrical system
Code
Remove No.1
(clamps the speed sensor
brake pipe
cable to the front brake
clamp Code
hose behind the headlamp)
8000B5906
Code
(only for bikes
without ABS)
Code
E
Place the clutch cable over
the ABS pipe - Be careful
Code
not to interlace each cable
with the other
Code
Be careful not to crush
the pipes against the
frame when assem-
bling the airbox
(*): NOTE: All the plastic clamps highlighted with this symbol must not be fixed until
the ABS pipes are connected to the unit (see fig. 13). Only after having reached the
correct disposition of the no. 4 brake pipes, it is possible to fix the highlighted clamps.
- 57 -