MV Agusta Brutale 675 Workshop Manual page 271

Assembly oil seal and anti-dust seal (right stem)
(Brutale 675)
After having carefully checked all components, substi-
tute those damaged and/or deteriorated.
Grease the lips of the new anti-dust seal (1) and the
new oil seal (2) with the appropriate grease.
Recommended grease: MOLYKOTE 55M
Make sure that the bushings and washer placed
against the oil seal are inside the sleeve. Proceed with
re-assembly of the oil seal using the required tools.
Special tool No. 8000B6785
Install the dust seal and oil seal on the stem.
Visually check for scratches and marks on the pump
rod and check that it slides smoothly inside the pump
unit without chamfering.
Substitute if necessary.
Insert the pump into the stem and fasten it on with the
relative screw.
Tighten at 35 N•m.
Suspension and wheels
- 17 -
2
1
35 N•m
F