MV Agusta Brutale 675 Workshop Manual page 262

Insert it on the opposite part, keeping the rim in a verti-
cal position.
Insert the guide spacer and utilising a press, squeeze
F
down the bearings.
Proceed as illustrated in the figure.
Attention: the wheel bearings should be
mounted with little interference but should
the action of the press be blocked in any way,
release the press.
Having completed the assembly, check that the alu-
minium spacer does not have axial play.
Assemble the wheel spindle and carry out again the
rolling check by rotating the wheel.
Suspension and wheels
- 8 -