Changing the unit of measurement
Allows for simultaneous editing of the following units of
measure:
• Speed
• Distance covered
WARNING
The modification or adjustment of display
functions must be carried out with the
engine off and running on neutral, with the
motorcycle stopped with the stands on the
ground. Changing display settings while
running is prohibited.
- Access the "SERVICE" mode as described in the pre-
ceding pages, and press the "SET" button for less
than four seconds to until the message "UNIT
CHANGE" appears.
- Press the "OK " button for less than three seconds
and the unit on the speedometer will begin to flash.
Maintenance
- 87 -
B