Unpacking And Setting Up Your Cube; Contents; Unpacking And Installing Your Cube - 3D Systems cube User Manual

UNPACKING AND SETTING UP YOUR CUBE

6

CONTENTS

Power Supply
Casing and its contents
*Depending on the Cube model and configuration, up to two cartridges may be included. Not every printer will be packaged with two
cartridges .
NOTE: The sandpaper should only be used for lightly sanding the print pad when prompted by the touchscreen
display . It should not be used for sanding parts . For more information, refer to the section titled Print Pad
Maintenance .
NOTE: The actual appearance of the contents may differ from the illustrations .

UNPACKING AND INSTALLING YOUR CUBE

NOTE: Keep all packing materials in case the printer would need to be transported . Shipping the printer without
the original packing materials may damage the printer and void the manufacturer's warranty.
1 . Pull the clips (A) and remove them from the top of the printer box .
3D Systems, Inc.
Cube Removable
Print Pad
Power Cord
Casing Gap Gauge
Cartridges*
Pliers Scraper
Sandpaper USB Mass Storage
Device
8
Cube Glue
Quick Start Guide
1 .5 mm Allen
Wrench
A