Updating The Cube Firmware; Updating Firmware Using Wi-Fi - 3D Systems cube User Manual
This printer is portable with a plug and print design that enables everybody in the family
to express their creativity like never before
Hide thumbs
Also See for cube:
- User manual (121 pages) ,
- Quick start manual (32 pages) ,
- Lesson (15 pages)
Table of Contents
Advertisement
UPDATING THE CUBE FIRMWARE
The printer firmware can either be updated via wireless connection or by using a USB mass storage device.
NOTE: Whenever a firmware update is performed, you must perform the Auto Level procedure and then the Auto
Gap procedure .
Updating Firmware Using Wi-Fi
1 .
Select SETUP .
System 3
2 .
Navigate to the
3 .
Select WIFI .
NOTE: The printer will attempt to connect to the server .
3D Systems, Inc.
screen and select FIRMWARE .
89
Advertisement
Table of Contents
