3D Systems cube User Manual page 30

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

4 .

Insert the print jet (from the cartridge that will be mounted on the left side of the

printer) into the left print jet opening on top of the printer .

5 .

Rotate the print jet clockwise until the dots (A) align . Select the

continue .

NOTE: As you rotate the print jet, ensure the print jet tube is

tucked under the top of the printer cover .

6 .

Mount the cartridge on the left side of the printer . Select the

continue .

NOTE: It may become necessary to rotate the cartridge to seat it

properly .

NOTE: The print jet will begin to heat . Once the print jet has reached

the operating temperature, the printer will prime melted material into

the refuse bin .

7 .

The left cartridge has been installed . Select the

procedure .

NOTE: Once the cartridge has been installed, allow the print jet to

cool down before continuing .

3D Systems, Inc.

checkmark

to complete the

Table of Contents