Unpacking And Setting Up The Cube - 3D Systems Cube 2nd Generation User Manual

7

UNPACKING AND SETTING UP THE Cube

What's Included:
PLA Material Cartridge
The Cube (1)
(1)
USB Cable (1)
Print Pad (1)
cable is used to
download firmware
only.
Note: Retain packaging and Cube carton for future transporting.
1. Remove white plastic inserts from each side of box. Pinch and bend insert out. Next, pull insert out of box to remove. Lift
top of carton up and remove.
Pinch &
Bend Out
Power Supply (1)
This Quick Start Up
Guide (1)
Plastic
Inserts
Unclog Tool (1)
Cube Tube (1)
Power Cord (1)
Remove
Insert
USB Memory
Cube Glue (1)
Stick(1)
Cube Photo Booth
Insert (1) (Use as a
backdrop to display
your creations.)
17