Operation Procedures; Applying Cube Glue - 3D Systems cube User Manual

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

OPERATION PROCEDURES

Cube Glue contains water-soluble glue that adheres the part to the print pad . It is important that glue is applied to the print pad before

starting any print to ensure that the creation does not move during the printing process .

Cube Glue contains a foam applicator under the cap . It is recommended that the bottle is turned upside-down with the cap on to allow

the glue to settle into the applicator before applying .

For best results, apply two thin layers of glue to the print pad using slow circular motions when prompted by the touchscreen display .

Apply the glue in an overlapping pattern . The coverage dimensions should be larger than the footprint of the creation you are printing .

Layer 1

Apply a thin layer of glue to the print pad following the illustration below:

Layer 2

Apply a second thin layer of glue to the print pad following the illustration below:

NOTE: Ensure the glue is dry before printing .

3D Systems, Inc.

Table of Contents