3D Systems cube User Manual page 13

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

2 .

Open the box .

3 .

Remove the upper foam support .

4 .

Remove the printer from the box and remove the protective bag from the printer .

Place the printer on a solid, level base where you intend to use it .

NOTE: When installing the printer there must be a minimum of 8"

(203 mm) of space on top and on either side of the printer .

NOTE: There must be a minimum of 4" (102 mm) space in front of

and behind the printer .

Front View

Hand Clearance Around the Printer

5 .

Remove the top insert .

3D Systems, Inc.

8" (203 mm)

Top View

Build Plate Travel Area

4" (102 mm)

Back

Front

4" (102 mm)

Table of Contents