3D Systems cube User Manual page 21

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

NOTE: The print jet will begin to heat . Once the print jet has reached

the proper temperature, the printer will prime melted material into

the refuse bin .

15 . The left cartridge has been installed . Select the

NOTE: The printer will begin to heat . Wait until the printer

has finished heating and then follow the user prompts in the

touchscreen menu .

16 . Insert the print jet (from the cartridge that will be mounted on the right side of the

printer) into the right print jet opening on top of the printer .

17 . Rotate the print jet clockwise until the dots align . Select the

continue .

NOTE: As you rotate the print jet, ensure the print jet tube is tucked

under the top of the printer cover .

3D Systems, Inc.

checkmark

to continue .

checkmark

Table of Contents