3D Systems cube User Manual page 86

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

NOTE: If the print pad is out of range, you will need to perform a

manual adjustment .

4 .

Remove the print pad and select the

NOTE: To remove it, lift up the front of the print pad and pull it

out of the printer . The print pad is magnetically attached to the

adjustment knobs .

5 .

When prompted, loosen the lock screw that is indicated on the touchscreen

display . Select the

checkmark

NOTE: Use a 1 .5 mm Allen wrench that is included with the printer .

NOTE: The lock screw (1) is located just below the adjustment knob

(2) . The lock screw for adjustment knob B can be accessed from the

front of the printer . The lock screw for adjustment knob A can be

accessed from behind the printer .

6 .

Follow the instructions on the touchscreen display . Once the adjustments have

been made, select the

7 .

When prompted, tighten the lock screw enough to ensure the adjustment knob

does not easily turn . Select the

Caution: Do not over-tighten the lock screw . This can damage the

adjustment knob and void the manufacturer's warranty.

3D Systems, Inc.

checkmark

to continue .

checkmark

to continue .

checkmark

to continue .

Table of Contents