3D Systems cube User Manual page 20

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

11 . Before installing cartridges, select the cartridge icon or select

process of installing your print cartridge .

NOTE: The printer will begin to heat . Wait until the printer has

finished heating and then follow the user prompts in the touchscreen

menu .

12 . Insert the print jet (from the cartridge that will be mounted on the left side of the

printer) into the left print jet opening on top of the printer .

13 . Rotate the print jet clockwise until the dots (A) align . Select the

continue

NOTE: As you rotate the print jet, ensure the print jet tube is tucked

under the top of the printer cover .

14 . Mount the cartridge on the left side of the printer and select the

continue .

NOTE: It may become necessary to slightly rotate the cartridge to

seat it properly .

3D Systems, Inc.

START

to begin the

checkmark

Table of Contents

Need help?

Do you have a question about the cube and is the answer not in the manual?