3D Systems cube User Manual page 14

This printer is portable with a plug and print design that enables everybody in the family to express their creativity like never before

Hide thumbs Also See for cube:

Table of Contents

6 .

Fold the sides inward and remove the lower insert from the printer .

7 .

Manually raise the print platform (A) and remove the spacer (B) from the printer .

8 .

Open the accessories box and unpack the material cartridge(s)*, the USB mass

storage device, the power supply and cord, and the bottle of Cube Glue .

NOTE: Keep all packing materials for future repacking .

NOTE: *Depending on your configuration, you may receive 1 or 2

cartridges with your printer .

9 .

Connect the power supply cable to the power inlet port (A) on the printer .

NOTE: Ensure the connection is secure . The cable should lock in

place . To remove the cable, pull back on the outer cable end and

carefully pull it out from the printer .

3D Systems, Inc.

Table of Contents

Need help?

Do you have a question about the cube and is the answer not in the manual?