Camera - avertX HD810 User Manual

Video Rotation
If your camera is installed on a wall or table top the image may appear
to be upside down. Rotate the camera video image using the software
to get a right-side-up image.
Note You cannot rotate the video image 90° to get a vertical image.
Rotating the image 90° will stretch and distort the video image.
To rotate the camera video image:
1. Click Setup.
2. Click Streaming.
3. From the Video Rotation list, select the desired rotation.
•
Normal transmits the image as the camera sees it.
•
Flip transmits the image backwards and upside down.
•
Mirror transmits a mirror image.
•
Rotate 90 degree clockwise/counterclockwise
•
180 degree transmits the image upside down.
32335AA

Camera

You can adjust your picture quality on both streams using the Camera
section of the Setup tab.
Select the video stream you want to adjust (H.264-1 or H.264-2).
There are three options for viewing video:
The default when viewing your camera using the web.
Use this to make the image smaller. This can save
bandwidth if necessary.
This will show your video at full screen on your monitor.
To exit full screen mode, double-click the video.
29