2.
If your camera is connected directly to the HDIP recorder: Type the
IP address of the recorder, followed by : and then /admin.
(example: http://10.1.10.15:83/admin)
a.
- Using the default web port (80), the camera uses an
address based on the IP address of the HDIP recorder
starting with port 81. Camera 3 will be port 83 and camera
11 would be port 91.
b.
- If using a unique web port, identify the correct web port
at Menu > Network > Webport
If your camera is connected to an external PoE switch, type the IP
address of the camera in the address bar of the web browser followed
by /admin. (example: http://10.1.10.27/admin)
3.
Type the user name and password of the camera in the pop up
window.
- The default username is admin and the password is 1234
NOTE: Do not change the username account/password on the camera
software
4.
After logging in, go to System > Storage Management > SD Card
22
5.
Ensure the camera is reading the card. Under Device
Information, the Free space will have a number corresponding
with the size of the card.
6.
Click Recording, on the left menu bar, and ensure that under
Recording Storage the SD Card option is selected.
7.
Under Recording Schedule, click the Always option.
8.
Click Save to apply the settings.