Weather Resistant Cable Connector; Black Paintable Dome Cover - avertX HD810 User Manual

Weather Resistant Cable Connector

This camera features an IP66-rated weather resistant connector. For
unprotected outdoor connections, screw the connector on the included
Ethernet camera cable onto the camera dongle. If your installation
location does not require a water resistant connection, loosen and slide
the connector back on the cable until it's out of the way.
Connecting the IP66 water resistant connector requires unscrewing the
thread lock cap and sliding back all parts of the assembly. Refer to
instruction card for more information.
CAUTION:
Do not attempt to disconnect the camera connection without
loosening the smaller thread lock cap. Do not force. Forcing
the assembly will break the camera dongle and will void
camera warranty.
32335AA

Black Paintable Dome Cover

The included black dome cover for the HD810 is paintable, allowing for a
customizable look. Use paint designed for plastic and paint away from the
camera dome to avoid overspray. To install, firmly press the cover onto the
camera.
How to Install
Once the paint is dried, slide on the cover completely to the base of the
camera.
How to Remove
Firmly compress the sides of the cover and slide off the base of the camera
15