Advertisement
MICRO SD CARD
AND RESET BUTTON
Your HD80 camera is equipped with a slot for a Micro SD card and a Reset button. To
access these, you must first remove the cover of the HD80 camera.
Insert a Micro SD card to be used for emergency video backup if desired. Push the
reset button to return the camera to factory default settings, if necessary.
HD80
Micro SD card slot
NETWORK CABLE INSTALLATION
When installing your AvertX Night Vision HD Indoor/Outdoor IP Dome Camera, it is
important to consider how the network cable attached to the camera is arranged.
•
If passing the cord through a wall or ceiling, drill a 3/4"" hole.
•
For outdoor installations, ensure the connection between your network cable and
the camera jack is housed within a wall or indoors.
•
For outdoor installations, use silicone caulking to seal any holes in the wall or
ceiling to protect against leaks.
Copyright © 2013 AvertX. All rights reserved. Information contained in this document
is subject to change without prior notice. AvertX does its best to provide accurate
information, but cannot be held responsible for typos or mistakes.
CONNECTING TO THE CAMERA
If you are using this camera with an AvertX recorder, follow the instructions in the
recorder user manual to connect to your camera. You can also set up your camera
using your PC. Use your browser to go to 192.168.0.250. The viewer software will
automatically be installed on your PC the first time you connect to the camera. If your
internet browser doesn't install the viewer software, check the security settings or
ActiveX controls and plug-in settings. If your internet browser asks for permission to
install the ActiveX control, you must allow the ActiveX control to continue.
To enable installation of ActiveX controls on Internet Explorer:
1. From the
2. Click Security, and then click Internet.
3. Click
Enable
to
To add the camera to your trusted sites:
1. From the
2. Click Security, and then click
3. Click Sites.
4. Type the
Reset button
check box is cleared.
USERNAME AND PASSWORD
The username and password are case sensitive. AvertX strongly recommends
changing the password after the initial setup to prevent unauthorized access to the
camera.
Username –
Password –
For Further Instruction
For more information on installing your AvertX camera, see the user manual or view
instructional videos at avertx.com/videos.
1-855-2avertX (1-855-228-3789)
www.avertx.com
Tools
menu, click
Internet
Options.
Custom Level
and ensure that all ActiveX controls and plug-ins are set
or Prompt.
Tools
menu, click
Internet
Options.
Trusted
Sites.
IP Address
of the camera. Ensure that the
admin
1234
Require
server verification
32346AA
Advertisement
