Advertisement
MICRO SD CARD
AND RESET BUTTON
Your HD90 camera is equipped with a slot for a Micro SD card, which can be used
for emergency video backup. Push the reset button to return the camera to factory
default settings, if necessary. To access the Micro SD card slot and the Reset button,
you must first remove the cover of the HD90 camera.
HD90IR
HD90IRV, HD90IRM, HD90IRMH
Reset button
Micro SD card slot
NETWORK CABLE INSTALLATION
When installing your AvertX Night Vision HD Indoor/Outdoor Bullet Camera, it is im-
portant to consider how the network cable attached to the camera is arranged.
•
If passing the cord through a wall or ceiling, drill a 3/4"" hole.
•
For outdoor installations, seal any holes in the wall or ceiling to protect against
leaks.
Copyright © 2013 AvertX. All rights reserved. Information contained in this document
is subject to change wtihout prior notice. AvertX does its best to provide accurate
information, but cannot be held responsible for typos or mistakes.
Reset button
Micro SD card slot
CONNECTING TO THE CAMERA
If you are using this camera with an AvertX recorder, follow the instructions in the
user manual to connect to your camera. You can also set up your camera over the
web. The viewer software will automatically be installed on your PC the first time you
connect to the camera. If your internet browser doesn't install the viewer software,
check the security settings or ActiveX controls and plug-in settings. If your internet
browser asks for permission to install the ActiveX control, you must allow the ActiveX
control to continue the installation.
To enable installation of ActiveX controls on Internet Explorer:
1. From the
Tools
menu, click
Internet
2. Click Security,and then click Internet.
3. Click
Custom Level
and ensure that all ActiveX controls and plug-ins are set
Enable
or Prompt.
to
To add the camera to your trusted sites:
1. From the
Tools
menu, click
Internet
2. Click Security, and then click
Trusted
3. Click Sites.
4. Type the
IP Address
of the camera. Ensure that the
check box is cleared.
USERNAME AND PASSWORD
The username and password are case sensitive. AvertX strongly recommendeds
changing the password after the initial setup to prevent unauthorized access to the
camera.
Username –
Admin
Password –
1234
For Further Instruction
For more information on installing your AvertX camera, see the user manual or view
instructional videos at avertx.com/videos.
1-855-2avertX (1-855-228-3789)
www.avertx.com
Options.
Options.
Sites.
Require
server verification
31629AA
Advertisement
